49
XL-DV60
Advanced Features
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
6 Within 30 seconds, press the PRESET ( or ) button to
specify the minute to start, then press the MEMORY/SET
button.
! Settings are displayed in order and the unit will enter the tim-
er stand-by mode.
! Timer set indicator will light up.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
7 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening to before your system entered the timer
stand-by mode.
8 The unit will enter the power stand-by mode one hour after
the timer playback starts.
Note:
When performing timer playback using an-
other unit connected to the VIDEO/AUX
jacks, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or
enter the power stand-by mode automatical-
ly. It will enter the power stand-by mode 1
hour after the playback starts. However, the
other unit will not be turned on or off.
To Next Page
Loading...
