Sharp XR-1X - Adjusting the Projected Image (“SCR - ADJ” menu)

43
XR-1X
YES
End
YES
Check connection of
FB3011, FB3012, and
FB3013.
NO
Check IC3002, Q3001,
Q3002, and peripheral
circuits.
NO
Check IC1773 and
peripheral circuits.
NO
Check IC1734 and
peripheral circuits.
NO
Component signal
check
Send component signals of
1080i (or 720P) from
INPUT 1. Use buttons on
the main unit or the remote
control to select INPUT 1.
Is image displayed
normally?
Are picture signals sent to
TL3002, TL3003, and
TL3004?
NO
Is the signal with a
frequency of 34 KHz (45
KHz for 720P) sent to
IC3005 pin (30) and
60 Hz (or 50 Hz for 50 Hz
system) to IC3005 pin
(31)?
YES
Is 3.3V applied to TL1773?
YES
Is 3.3V applied to TL1734?
YES
Check IC3005 and
peripheral circuits.
YES