Sharp XV-ZW99U - Convergence and Focus Adjustments Mechanism

xv-zw99u
I
Notes :
0
0
The eccentric cam is used for convergence adjustment. This means that the cam’s turning and the linear
movement are not always uniform.
This model is not equipped with the LCD image adjustment mechanism. This is because the dichroic
prism is used for image formation. When the LCD panels all get into the best focus, the images are
almost completely converged.
Convergence and Focus Adjustments Mechanism
Notch and hole “a”
(Use an eccentric
screwdriver.)
IJ
“b”
FRONT
(Use an bladed screwdriver.)
SIDE VIEW (from inside)
SIDE VIEW (from outside)
Eccentric cam
Eccentric cam
(f3Z direction adjustment)
\Lock screw “d”
R-B-LCD
SIDE VIEW
G-LCD panel
/yys