EN-21
SPECIFICATIONS
AC Line Voltage 230V, 50Hz, single phase
Distribution line fuse/circuit breaker 16A (time lag)
AC Power Required 3.15 kW
Output Power 2100W (IEC 60705)
Microwave Frequency 2450MHz *(Group 2/Class B)
Sound level less than 70dB (A)
Outside Dimensions 510 mm(W) x 335 mm(H) x 470 mm(D) (Single oven)
510 mm(W) x 670 mm(H) x 470 mm(D) (Two ovens)
Cavity Dimensions 330 mm(W) x 180 mm(H) x 330 mm(D)
Oven Capacity 20 litres
Cooking Uniformity Rotary antenna system
Weight Approx. 33 kg
This product contains a light source of energy efficiency class G.
* This Product fulfils the requirement of the European standard EN55011. In conformity with this standard,
this product is classified as group 2 class B equipment. Group 2 means that the equipment intentionally
generates radio-frequency energy in the form of electromagnetic radiation for heating treatment of food.
Class B equipment means that the equipment suitable to be used in domestic establishments.
(This product is designed for commercial application only and as such it falls outside the scope of
Regulation (EC) 1275/2008 implementing EU Directive 2005/32/EC on eco-design requirements for
standby and off mode electric power consumption. Sharp do not recommend the product for domestic
application and will not accept any liability for such use.)
External equipotential bonding terminal
This appliance has an external equipotential bonding terminal, and this symbol is on the back of
the microwave oven.
As part of a policy of continuous improvement, we reserve the right to alter design and specification without
notice.
To Next Page
Loading...
