EasyManua.ls Logo

Sharp YB-S4202AE - Programme Operation

Sharp YB-S4202AE
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-8
PROGRAMME OPERATION
This oven has 20 memory banks (1-20) which can store cooking programmes.
The memory banks 1-10 have been programmed previously as shown in the table. These preprogrammed
memory banks can be changed individually if required. Please see page EN-9.
In addition for all memory banks a magnification factor 1.8 for the double quantity is stored. The stored
magnification factor can also be changed individually if required. Please see page EN-10.
Information in these memory banks is not lost due to power interruptions. If the power goes off, the oven does
not need to be reprogrammed. No batteries are necessary for this type of memory.
To check the stored programmes, please refer to “Memory check”on page EN-10.
Example : Suppose you want to cook by using memory 1, which was programmed for 5 seconds at 100 %.
Example : Suppose you want to cook 2 servings by memory 1.
COOKING WITH MEMORY PROGRAMME
Cooking double quantity with memory programme
Memory No. Cook Time Output Power Memory No. Cook Time Output Power
1 5 sec. 100% 6 50 sec. 100%
2 10 sec. 100% 7 1 min. 100%
3 20 sec. 100% 8 1 min. 15 sec. 100%
4 30 sec. 100% 9 1 min. 30 sec. 100%
5 40 sec. 100% 10 2 min. 100%
POWER
ON
NUMBER
1
%
Choose memory number.
Choose double quantity cooking mode.
After 1 second, the oven starts.
Check the display.
Choose memory number.
NOTE:
If you want to cook by using memory 11-20, touch the desired NUMBER key twice within 1 second.
POWER
%
DOUBLE
ON
NUMBER
1
After 1 second, the oven starts.
Check the display.
NOTE:
1. If you want to cook double quantity by using memory 11-20, touch the desired NUMBER key twice within
1 second.
2. Double quantity means best time for cooking two servings; it is not double the time.
A. The Memory cooking system does not require the use of the START key (
). Memory can not be
used to start the oven if any programme is on display.
B. If the door is opened during memory cooking, the programme is canceled.
C. To stop the cooking of a memory key and then restart, first, touch the STOP/CLEAR key ( ),
then open the door, check food, close door and touch START key ( ).
D. If the memorized time exceeds a maximum time for double quantity cooking, the display will show “EE9”
and stop.You can use the memory for 1 serving cooking only. See page EN-11 about the maximum time.

Related product manuals