EN-7
ACCESSORIES
SHORT DESCRIPTION OF FEATURES
BEFORE OPERATION
Check to make sure the following accessories are provided:
Manual operation
for individual cooking and defrosting of different
types of food by setting of time and power.
Double quantity function:
by pressing double quantity key beforehand, the
oven calculates the cooking time for the double
amount of food on Memory function.
Repeat cook:
after manual operation it is possible to use same
cooking time and power level again just by pressing
manual / repeat key and then start key.
Error message:
Mistakes in operation of technical problems are
displayed with an Error code.
Multiple sequence cooking:
programming of 2-3 different cooking times and
power levels, running automatically.
Counter function:
The oven counts automatically all operations.
Defrost function:
for well defrosting of different types of food, without
power level setting.
Accustical signal:
At cooking end a signal will sound. Loudness and
length can be varied.
Memory function:
preprogrammed cooking times and power levels
(possible to change individually).
Volume and Sound Setting
There are 3 preset volume levels of 2 different-
sounds on your oven.
NOTE:
• When you order accessories, please mention the two items: part name and model name to your dealer or
SHARP authorized service agent.
• The model name is printed on the door of the microwave oven.
* Before operating your new oven, make sure
you read and understand this operation manual
completely.
To set the volume and the sound, touch the SET key
(
) twice within 2 second and then touch the
SIGNAL key ( ) continuously until you hear
desired volume and sound.
NOTE:
1. The volume will decrease as you
press the SIGNAL key (
).
After the lowest level, the volume will return to
the maximum level and the sound will change to
another one at the same time.
2. Any audible signals will not sound when the SET
key is touched first and then an audible signal will
sound when the SET key is touched second.
Manuals and others
• Operation manual
• Menu sticker
Enter cooking times or dish names in this sticker and attach to the control panel.
• Caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS)
1) Plug in the oven.
* The digital display will then show
.
2) You can input the keys only when the door is
closed.
3) Oven lamp and fan motor work for 1 minute
whenever the door is opened or after cooking.
4) The programme and the check are canceled
when any keys are not touched for more than 3
minutes during programming.
5)
will appear on the display after the timer
reaches zero. It will disappear when the oven door
is opened or the STOP/CLEAR key ( )
is touched.
Use the STOP/CLEAR key (
) to:
1. Stop the oven temporarily during cooking.
2. Erase a mistake during programming.
3. Cancel a programme during cooking by touching
twice.
Using STOP/CLEAR ( ) Key
To Next Page
Loading...
