Sharp ZQ-2500

Transferring data with another ZQ series
or IQ series Organizer
Data transfer restrictions
There are some restrictions when transferring data with any ZQ
series Organizer other than the ZQ-2500/ZQ-2700 or the IQ
series Organizers (previously shown). These restrictions result
from differences in functions and the maximum allowable size
of an entry between the Organizers.
When transferring SCHEDULE data from the ZQ-D400,
ZQ-4450, or ZQ-4450M, or the ZQ-6000, IQ-8000, IQ-7000 or
ZQ-5000 series Organizers
l Any alarms set on SCHEDULE data transferred from one of
the above Organizers, regardless of their actual setting time
for the specified events, will be set to the events starting
time on the ZQ-25OO/ZQ-2700.
When transferring data from ZQ-6000 or IQ-8000 series
Organizers
. When transferring an entry from the ZQ-6000 or IQ-8000
series to the ZQ-2500/ZQ-2700, the maximum allowable
size of the transferred entry is as follows:
TEL mode: 537 characters
SCHEDULE mode:
523 characters
MEMO mode:
544 characters
If an entry exceeding these limits is sent to the
ZQ-2500/ZQ-2700, “I/O DEVICE ERROR” appears and the
transfer will not be successful.
The maximum number of characters that can be edited after
an entry is transferred to the ZQ-2500/ZQ-2700 is 514 in
the TEL mode and 512 in the SCHEDULE and MEMO
modes. Entries exceeding these limits can be displayed but
cannot be edited. Those exceeding 515 characters can
neither be displayed nor edited.
Mode transfers from the ZQ-6000 series and IQ-8000 series
can be performed even when the maximum length of an
entry exceeds the character limits specified above.
However, to display and edit data, the number of characters
must be within these limits.
TEL free field contents can be received and displayed on
the ZQ-2500/ZQ-2700 but are deleted once the edit mode is
entered.
When transferring data to and from ZQ-1000 series
Organizers
l All characters transferred from the ZQ-2500/ZQ-2700 are
displayed in capital letters on the ZQ-1000 series.
Characters and symbols that cannot be displayed on the
ZQ-1000 series appear as “ n ‘I.