Sharp ZQ-2500

Reset Procedure
When trouble occurs
An impact or a strong external electrical field may stop the
keys functioning. Press the RESET switch on the back of the
Organizer.
The impact or external electrical field may erase some or all of
the Organizer’s memory.
Press the RESET switch with the tip of a ball-point pen or
similar object, but not anything breakable (like a pencil point or
a needle).
All RESET operation
If a problem occurs after replacing the batteries, or if the
Organizer does not function properly even after the above
RESET operation, perform the following:
1. While holding ‘@), press the RESET switch on the back.
Release the RESET switch and then release a.
The following display will appear.
) CLEA: ALL DATA )
2. Press m.
Returns to the initial display.
Caution: Do not press m in step 2. Pressing Iv] will
delete all data stored in the Organizer and reset
the built-in clock.
Troubleshooting
If the Organizer malfunctions, please go through the following
checklist before sending it out for repair:
31