Shelly PRO 2 User Manual

Timer
Аllows you to manage the power supply automatically. You may use:
• Auto ON: After turning off, the relay output will be automatically turned on after
a predefined time (in seconds).
• Auto OFF: After turning on, the relay output will be automatically turned off after
a predefined time (in seconds).
Schedule
This function requires a working connection to the Internet. Shelly may turn
on/off automatically at a predefined time and day throughout the week.
Additionally, Shelly may turn on/off automatically at sunrise/sunset, or at a
specified time before or after sunrise/sunset. You may add up to 20 weekly
schedules.
Internet
Configure Wi-Fi, AP, Cloud, Bluetooth, MQTT settings.
• Wi-Fi Mode Client: Connect the relay to your Wi-Fi network. Here, you can also
set a static IP address.
• Wi-Fi Client Backup: An option to connect to an alternative network in case the
primary network fails or is too slow.
• Wi-Fi Mode AP: The mode in which the device creates its own Wi-Fi connection
point with the respective name (SSID).
• Ethernet: Connect the Shelly device to a network using an ethernet cable. This
requires a device reboot! Here, you can also set a static IP address.
• Cloud: Connection to the cloud allows you to control your device remotely and
to receive notifications and updates.
• Bluetooth: Enable/disable
• MQTT: Configure the Shelly device to communicate over MQTT.
Application Settings
• Channel Name: Set a name for the chosen channel
• Appliance Type: Choose from a given list what type of appliances your Shelly
Pro 2 will be used with. The available options are “Socket, Lights, Heating,
Entertainment”. А custom type can be set as well.
• PIN lock: Restrict control of the Shelly device through the web interface by
setting a PIN code. Click “Enable” and set the channel PIN lock, then click “Save”.
• Exclude from Event Log: Do not show events from this device in the app.
Webhooks
Use events to trigger http endpoints. You can add up to 20 web hooks.
Share
Share the control of your device with other users.
Settings
• Button Type: These settings define the way the attached switch or button
controls the output state. The possible input modes are “button” and “switch”,
and the relay mode can be chosen depending on the preferred usage of the
15

Shelly PRO 2 Specifications

General

Channels	2
MCU	ESP32
Bluetooth	Yes
Type	Relay Switch
Max Load per Channel	16A
Connectivity	Wi-Fi
Operating Temperature	-20°C to 60°C
Wireless Protocol	802.11 b/g/n
Output Voltage	110-240V AC
Protection	Overvoltage protection
Certifications	CE, RoHS