SHERCO ST Series User Manual

132
ST SERIES
❱❘
BRAKTEC
CHANGING FRONT FLEXIBLE BRAKE HOSE
- Once the fl exible brake hose has been
changed, fi ll up the tank with DOT4
Minerva brake fl uid.
- Loosen the grasper bleeder and purge
the fl exible brake hose by pressing
successively until the brake lever limit is
reached. Repeat this operation until the
lever at pressure feels to have reached
maximum hardness.
- Fluid level must be checked once
bleeding has been completed. Fluid
level must reach half way up the viewer.
- Dismantle the fl exible brake hose.
- Once the fl exible brake hose has been
changed, fi ll tank half way with new
brake fl uid.
- Loosen the grasper bleeder and purge
the fl exible brake hose by pressing
successively until the brake lever limit is
reached. Repeat this operation until the
lever at pressure feels to have reached
maximum hardness.
- Fluid level must be checked once
bleeding has been completed.

SHERCO ST Series Specifications

General

Brand	SHERCO
Model	ST Series
Category	Motorcycle
Language	English