182
ST SERIES
- Loosen and remove the radiator cap.
- Loosen and remove the cooling circuit
draining screw.
- Have a receptacle ready to collect the
fl uid. Empty the cooling fl uid from the
engine.
- Replace and close the draining screw.
- Dismantle the starter pedal.
- Empty the oil from the engine carter.
- Loosen the screws of the engine's right-
hand semi-carter. Remove the semi-
carter including its cover.
- Check the axle and make sure that the
seal is leak-tight.
WATER PUMP
❱❘
PARTS BREAKDOWN
To Previous Page
Loading...
Need help?
General
