SHERCO ST Series User Manual

172
ST SERIES
START ROUTINE
- First see - gear selector - page 53
- Remove the washer, the sleeve and the
spring from its positioning hole in order
to remove it.
- Remove the starter axle, remove the
spring.
- Remove the washer and check sliding
and wear and tear on the pawl and
ratchet.
- Before assembling, check the axle and
pawl are of the same brand.
- Lay out the pieces in the same order in
which they were dismantled in order to
facilitate the assembly process.

SHERCO ST Series Specifications

General

Brand	SHERCO
Model	ST Series
Category	Motorcycle
Language	English