Section 6 Operation and works
37
<Loading>
(1) Lift up the implement.
(2) Load the implement gently in the straight
direction to the footboards.
(3) Operate the steering handle carefully not
to allow the wheels to get out of the
footboards.
(4) After completion of loading, turn the main
switch to [OFF] and fix the vehicle
positively with a rope.
<Unloading>
(1) Unload the machine in the reverse
procedure to loading.
② Transportation
Warning
● Fix the vehicle with a strong rope positively.
Otherwise, the vehicle may turn over from the
bed when the brake of the truck is suddenly
applied, causing an unexpected accident.
Caution
● When transporting the machine on a truck, fix
the cover with the cover hook to prevent it
from opening. Otherwise, the cover may open
by the wind, causing an unexpected accident.
7. Power steering
Caution
● While the engine is running, the steering
wheel can be steered very lightly. Be careful
when traveling at a high speed. Otherwise, an
accident may be caused.
The power steering function is active only while
the engine is running. When the engine speed
is low, the steering wheel may be a little heavy.
This is not a trouble.
[Caution for handling]
● When the steering wheel is fully turned, the
relief valve is activated and a signal sound is
generated. It may be ignored for a short time
but operation should not be continued while
this sound is generated.
● Do not steer the steering wheel while the
vehicle stops (rest steering) unless it is
required for some reason since the tire or rim
is damaged.
To Next Page
Loading...
