Section 8 Handling of mower
44
4. Adjusting the cutting height
● Before adjusting the cutting height, align the
rotary blades and lower blade.
● Adjust the cutting height for all of the 5 mower
units.
● To cut the grass evenly to a required height,
adjust the front and rear rollers.
(1) Lift the mower and stop the engine.
(2) Position the No.4 and 5 units to the
maintenance position.
(3) Tighten the rear roller bracket to be in the
desired cutting height range.
Rear roller bracket tightening position in cutting
height range
To Next Page
Loading...
