Shibuya H2021 - EU DECLARATION OF CONFORMITY

27
EU DECLARATION OF CONFORMITY
SHIBUYA COMPANY, LTD.
5
-
86, MOKUZAIKO
-
KITA, HATSUKAICHI, HIROSHIMA 738
-
0021 JAPAN
declares, in sole respo
nsibility, that the following equipment
Drill Stand Model TS
-
255 with H2021 Drill
Motor (110
V), Country of Origin
: Japan
Drill Stand Model TS-255(AB52) with H2021 Drill Motor (110 V), Country of Origin: Japan
Drill Stand Model TS-255 with H2021 Drill Motor (220-240 V), Country of Origin: Japan
Drill Stand Model TS-255(AB52) with H2021 Drill Motor (220-240 V), Country of Origin: Japan
Serial No.:
Referred to in this declaration conforms with the following directive(s):
Machinery Directive 2006/42/EC, Annex I, Annex IIA
Harmonized standards: EN 62841-1:2015, EN 62841-3-6:2014
EN ISO 12100:2010
EMC Directive 2014/30/EU
Harmonized standards: EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61000-3-11:2000
RoHS Directive 2011/65/EU
Authorized representative / Importer in UK;
DYMATEC
LTD
Units 11-14 Cemetery Road, Houghton Regis, Bedfordshire, LU5 5BZ, United Kingdom
Mr. Jeremy Da
vid Newton
The person authorized to compile the technica
l file;
Mr. Jeremy David Newton
Units
11
-
14
Cemetery
Road,
Houghton
Regis, Bedfordshire,
LU5
5
BZ
, United Kingdom
Note: This declaration becomes invalid if technical or operational modifications are introduced without
the manufacturer’s consent.
Hiroshima, 6/2019
Kazuyoshi Shibuya, Director
SHIBUYA COMPANY, LTD.