Electronic relay heat accumulation rate
monitoring
The smallest unit is 0.01%
The smallest unit is 0.01KW
Temperature rise accumulation rate
monitoring
The smallest unit is 0.01%
NTC temperature accumulation monitoring
The smallest unit is 0.01℃
Motor electronic heat accumulation rate
The smallest unit is 0.01%
Target pressure monitoring
The smallest unit is 0.01%
Feedback pressure monitoring
The smallest unit is 0.01%
The smallest unit is 0.01Hz
HDI terminal input frequency (SA3, SF3)
The smallest unit is 0.01kHz
M2 terminal input frequency (SE3)
Inverter output torque monitoring
Target frequency monitoring
The smallest unit is 0.01Hz
1: P.996
2: P.997
3: P.998
4: P.999_1 part of the parameters restored
to factory values
5: P.999_2 other parameters other than
user parameters restored to factory values
6: P.999_3 user parameters, other
parameters restore factory value
7: Communication P.998
8: Communication P.999_1 The other
parameters except communication
parameters are restored to factory values
9: Communication P.999_2, except for
communication parameters and user
parameters, other parameters are restored
to factory values
10: Communication P.999_3 Except
communication parameters and user
parameters, other parameters are restored
to factory values (Note 4)
H0000: communication mode;
H0001: external mode;
H0002: JOG mode;
H0003: Mixed 1 mode;
H0004: Mixed 2 mode;
H0005: Mixed 3 mode;
H0006: Mixed 4 mode;
H0007: Mixed 5 mode;
H0008: PU mode
:The second
mode of operation.
Line speed feedback monitoring
Line speed target value monitoring
Torque reference monitoring