Shimadzu AA-7000 Series User Manual

AA-7000F/AAC creates an integral burner and furnace that remains permanently installed in the combustion chamber.
It supports both flame analysis of high concentration samples and furnace analysis of trace samples, without changing
the atomizer unit. The integral construction with the atomizer saves space.
AA-7000F enables above function by AAC-7000 (option).
* The AAC-7000 cannot be attached to an AA-7000G instrument.
Single Unit Handles High Concentration to Trace Analysis Samples
10
Improved Dual Atomizer System

Shimadzu AA-7000 Series Specifications

General

Model	AA-7000 Series
Type	Atomic Absorption Spectrophotometer
Wavelength Range	185 to 900 nm
Detector	Photomultiplier tube
Flame Method	Air-Acetylene, Nitrous Oxide-Acetylene
Monochromator	Czerny-Turner mounting
Light Source	Hollow Cathode Lamp, Deuterium Lamp
Graphite Furnace Method	Available
Background Correction	Deuterium lamp and self-reversal method
Atomization Method	Flame, Graphite Furnace
Graphite Furnace Heating Program	20 steps
Safety Features	Gas leak detector, flame sensor, over-temperature protection
Optical System	Double-beam
Sample Introduction	Nebulizer for flame, Autosampler for graphite furnace (optional)
Data Output	USB
Power Supply	AC 100V to 240V, 50/60 Hz
Spectral Bandwidth	0.2, 0.5, 1.0, 2.0 nm (automatic switching)