EasyManua.ls Logo

Shimano Steps BT-E6010 - User Manual

Shimano Steps BT-E6010
69 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
UM-79H0A-000-00
User's manual
Original instructions
E5000 Series
Shimano Total Electric Power System

Table of Contents

Other manuals for Shimano Steps BT-E6010

Preview: Dealer's Manual
Dealer's Manual57 pages
Preview: User Manual
User Manual62 pages

Questions and Answers

  • S
    Susan WatsonAug 23, 2025
    Why is my Shimano Steps BT-E6010 cycle computer not displayed?
    • D
      David FrazierAug 25, 2025
      If your Shimano Steps Bicycle Accessories cycle computer isn't displaying when you press the battery power button, consider the following: * Recharge the battery if the charge is insufficient. * Ensure the power is turned on by holding down the power button. * The power cannot be turned on while the battery is charging, so stop charging. * Ensure the cycle computer is correctly installed to the bracket. * Check if the connector of the electric wire connecting the motor unit to drive unit is not disconnected. If the issue persists, a component that the system cannot identify may be connected, or you may need to contact the place of purchase.
  • T
    Travis AdamsAug 31, 2025
    Why is assistance not being provided on my Shimano Steps Bicycle Accessories?
    • B
      Bryan BakerSep 1, 2025
      If you're experiencing assistance issues with your Shimano Steps Bicycle Accessories, check these potential causes: * Ensure the battery is sufficiently charged and recharge if needed. * If riding on long slopes in summer or carrying heavy loads, turn off the power temporarily. * Assistance is not provided at speeds of 25 km/h or more, so check your speed. For issues related to incorrect connections or problems with the drive unit, cycle computer, or assist switch, contact the place of purchase.
  • S
    Stacey WilliamsSep 1, 2025
    What to do if the Shimano Steps BT-E6010 battery cannot be recharged?
    • J
      Joseph SchmidtSep 1, 2025
      If your Shimano Steps Bicycle Accessories battery is not recharging, consider the following: 1. Ensure the charger's power plug is securely inserted into the electrical outlet; disconnect and reconnect to try again. 2. Make sure the charger's recharging plug is securely inserted into the battery; disconnect and reconnect to try again. 3. Verify the charging adapter is securely connected to both the charging plug and the battery charging port. 4. Check for dirt on the connecting terminals of the charger, adapter, or battery and clean with a dry cloth. If the battery still won't recharge after these steps, contact the place of purchase.
  • C
    Christine CamposSep 2, 2025
    Why is pedaling so stiff on my Shimano Steps BT-E6010?
    • T
      Tammy WrightSep 2, 2025
      If you find that pedaling feels stiff with your Shimano Steps Bicycle Accessories, here are a few things to check: * Ensure your tires are inflated to the correct pressure by using a pump to add air. * Verify that the assist mode is not set to [OFF]; set it to [HIGH]. * Check if the battery is running low and charge it fully. * Make sure you didn't turn on the power while your foot was on the pedal; try turning it on again without pressure on the pedal. If the issue continues after these checks, contact the place of purchase.
  • J
    Julie FinleySep 3, 2025
    Why does the LED on my Shimano Steps BT-E6010 Bicycle Accessories charger not illuminate?
    • I
      imillerSep 3, 2025
      If the LED on your Shimano Steps Bicycle Accessories charger isn't lighting up, first, check the connection of the recharging plug to the battery for any foreign objects and reinsert it. Also, if the battery is fully charged, the LED may turn off, which isn't a malfunction. Disconnect and reconnect the charger's power plug to try again. If the LED still doesn't illuminate, contact the place of purchase.
  • M
    Marc SchwartzSep 4, 2025
    What does error E020 mean on Shimano Steps BT-E6010?
    • D
      Dorothy GoodwinSep 4, 2025
      If you're getting error E020 on your Shimano Steps Bicycle Accessories, it means a communication error between the battery and drive unit was detected. To solve this, check that the cable between the drive unit and battery is properly connected. If the situation does not improve, contact the place of purchase.
  • L
    leebrandonSep 4, 2025
    How to fix E010 error on Shimano Steps Bicycle Accessories?
    • M
      madison33Sep 4, 2025
      If you receive error E010 on your Shimano Steps Bicycle Accessories, it indicates a system error. Press the power button of the battery to turn it on again. If the problem persists, contact the place of purchase.
  • E
    Eddie DixonSep 5, 2025
    What does W030 error mean on Shimano Steps BT-E6010?
    • D
      davidsmithSep 5, 2025
      If you encounter error W030 on your Shimano Steps Bicycle Accessories, it could be due to two or more assist switches connected to the system or a communication error between the drive unit and the motor unit. To resolve this: * Change the assist switch to the gear shifting switch, or connect only one assist switch and turn on the power again. * Check that the cable is properly connected between the drive unit and the motor unit. If the situation does not improve, contact the place of purchase.
  • C
    coopermichaelSep 6, 2025
    What does E012 error mean on Shimano Steps Bicycle Accessories?
    • S
      Sarah LongSep 6, 2025
      If you see error E012 on your Shimano Steps Bicycle Accessories, the initialization of the torque sensor failed. To resolve this, with your foot off the pedal, press the battery power button and turn on the power again. If the situation does not improve, contact the place of purchase.
  • N
    Nathan CampbellSep 7, 2025
    What to do if Shimano Steps Bicycle Accessories shows temperature protection warning?
    • T
      Travis ChavezSep 7, 2025
      To address a temperature protection issue with your Shimano Steps Bicycle Accessories battery, leave the battery in a cool place away from direct sunlight until its internal temperature decreases sufficiently. If the problem continues, contact the place of purchase.

Summary

Important Notice

Important Safety Information

Guidance on crucial safety aspects, covering potential hazards and precautions for safe operation.

Ensuring Safety

Specific instructions and warnings to prevent accidents and ensure the safe use of the product.

Connection and Communication

PC and Device Connectivity

Details on connecting SHIMANO STEPS to PCs and smartphones/tablets for configuration and updates.

SHIMANO STEPS Features

Assist Mode Overview

Explanation of the different assist modes (HIGH, NORM, ECO, OFF, WALK) and their usage scenarios.

Getting Started with SHIMANO STEPS

Battery Charging Procedure

Instructions on how to charge the SHIMANO STEPS battery, including different battery types.

Component Identification

Cycle Computer, Assist Switch, and Drive Unit

Identifies the cycle computer, assist switch, and drive unit components of the system.

Battery Types and Mounts

Illustrates various battery types (down-tube, rear carrier, integrated) and their respective mounts.

Battery Charger and Switch Unit

Identifies the battery charger and the switch unit for system control.

System Specifications

Preparation

Battery Charging Details

Comprehensive guide to charging the battery, including safety warnings and notes.

Charger and Battery LED Indicators

Explains the meaning of LED lights on the charger and battery for status indication.

Battery Level Indication and Handling

How to check battery levels and guidelines for handling the battery, including storage and usage.

Battery Installation and Removal

Step-by-step instructions for securely installing and safely removing the battery from the bicycle.

Cycle Computer Installation and Removal

Procedure for attaching and detaching the cycle computer to and from its bracket.

Operation

Powering the System On and Off

Methods for turning the SHIMANO STEPS system power on and off using the cycle computer or battery.

Basic System Operation

Fundamental controls and interactions with the SHIMANO STEPS system via cycle computer and switch units.

Control Interface Details

Detailed explanation of buttons and displays on the SC-E6100, SC-E7000, and EW-EN100 units.

Light Operation

Instructions on how to turn the bicycle lights on and off using the system controls.

Basic Status Display Information

Understanding the various icons and data displayed on the cycle computer for system status.

EW-EN100 Battery Level Display

How the EW-EN100 unit indicates the current battery level through its LED lamps.

Changing Assist Mode

Steps to select and change between different assist modes using the system controls.

EW-EN100 Assist Mode Change

Procedure for changing assist modes using the EW-EN100 unit's button and LED indicators.

Walk Assist Mode Functionality

How to activate and use the walk assist mode for pushing the bicycle.

Walk Assist Function Operation

Detailed steps for operating the walk assist function, including starting, stopping, and exiting.

Switching Travel Data Display (SC-E6100)

How to cycle through different travel data screens on the SC-E6100 cycle computer.

Clearing Traveling Distance Data

Procedure to reset the traveling distance and related data on the SC-E6100 cycle computer.

Switching Traveling Data Display (SC-E7000)

How to change the displayed travel data on the SC-E7000 cycle computer.

Gear Shifting Mode Selection

How to switch between automatic and manual gear shifting modes for electronic systems.

Setting Menu Navigation

Launching Settings on SC-E6100

Steps to access the setting menu and navigate options on the SC-E6100 cycle computer.

Launching Settings on SC-E7000

Procedure to enter the setting menu and select options using the SC-E7000 cycle computer.

Setting Reset Options

How to reset traveling distance or specific setting values through the menu.

Clock Time Setting

Instructions for setting the current time (hour and minute) on the cycle computer.

Start Mode Setting Configuration

How to configure the preferred starting gear for the start mode function.

Backlight Setting (SC-E6100)

Options for configuring the display backlight, including always on, always off, or manual control.

Brightness Setting (SC-E6100)

Adjusting the display brightness level of the SC-E6100 cycle computer.

Light ON;OFF Setting (SC-E7000)

Configuring the battery-powered light to be always on or always off.

Beep Sound On;Off Setting

Enabling or disabling beep sounds for system operations and errors.

Unit Switching (km;mile)

Toggling the unit of measurement between kilometers and miles for display.

Language Setting Configuration

Selecting the desired display language for the cycle computer interface.

Font Color Setting

Choosing the font color for the display, between black and white options.

Automatic Shift Timing Adjustment

Customizing the timing of automatic gear shifts to optimize pedaling effort.

Shifting Advice Function Control

Enabling or disabling the feature that provides recommended shift timings.

RD Protection Reset Procedure

Steps to reset the rear derailleur protection function after an impact.

Exiting the Setting Menu

How to close the setting menu and return to the main operating screen.

EW-EN100 Specific Settings

EW-EN100 RD Protection Reset

Procedure for resetting RD protection on the EW-EN100 unit using its button.

Gear Shifting Adjustment

Information on adjusting gear shifting, typically requiring dealer consultation.

Drive Unit Data Backup

Overview of automatic data backup for the drive unit and when updates are prompted.

Device Connectivity and Wireless Functions

Wireless System Specifications

Details on frequency bands, power, and firmware versions for wireless system models.

Errors and Remedies

Battery LED Error Indications

Interpreting various lighting patterns of battery LEDs to diagnose system errors.

Error Messages and Indicators

Understanding cycle computer error codes (W###) and EW-EN100 indicators for diagnosis.

System Error Codes (E###)

Interpreting system error codes (E###) displayed on the cycle computer and applying remedies.

Troubleshooting Guide

Assist Function Issues

Common problems related to assistance not being provided or short traveling distance, with solutions.

Battery Troubleshooting

Solutions for battery-related issues like stiffness, quick discharge, and recharging problems.

Light Troubleshooting

Diagnosing and resolving issues where bicycle lights do not illuminate.

Cycle Computer Troubleshooting

Addressing problems with the cycle computer display, startup, gear position, and settings.

Other Troubleshooting Topics

Resolving issues related to switch operation, noises, and gear shifting adjustments.

Shimano Steps BT-E6010 Specifications

General IconGeneral
Battery TypeLithium-ion
Nominal Voltage36 V
Nominal Capacity11.6 Ah
Watt-hour Rating418 Wh
Charging Time5 hours
CompatibilityShimano Steps E6000 series
Weight2.55 kg
Operating Temperature-10°C to 40°C
Compatible ChargerShimano Steps EC-E6000

Related product manuals