Shimano Steps DU-E6002 - Page 73

https://shimano-steps.com/
142 143
https://shimano-steps.com/
E6000 Series
E6000 MANUALE8000 CONCEPT E8000 MANUAL E6000 CONCEPT
Start Mode Setting
Sets the start gear when using start mode function.
1. With the bicycle stopped, pressing both the Assist-X and Assist-Y at the same time for 2 seconds.
The “Setting menu" screen is displayed.
2. Press the Assist-X and Assist-Y to move the cursor to "Start mode", then press the Assist-A.
“Start mode" setting screen is displayed.
3. Press the Assist-X or Assist-Y to move the cursor to the item you want to configure.
Assist Shift
Assist Shift
<SW-E6000> <SW-E6010>
Configurable items Details
OFF No setting
2 2-speed
3 3-speed
4 4-speed
5 5-speed
<SC-E6010> <SC-E6000>
4. Pressing the Assist-A button enables the set value at the cursor position.
The “Setting menu" screen is displayed.
Assist Shift
Assist Shift
<SW-E6000> <SW-E6010>
5. Press the Assist-X or Assist-Y to move the cursor to "Exit".
6.
Pressing the Assist-A exits the setting menu and takes you back to the basic screen.
Clock Setting
Configure the clock setting.
1. With the bicycle stopped, pressing both the Assist-X and Assist-Y at the same time for 2 seconds.
The “Setting menu" screen is displayed.
2. Press the Assist-X and Assist-Y to move the cursor to "Clock", then press the Assist-A.
“Clock" setting screen is displayed.
3. Press the Assist-X or Assist-Y to set the hour, then
press the Assist-A enables the set value.
The cursor moves to the minutes setting.
Press Assist-X to increase the numbers.
Press Assist-Y to decrease the numbers.
4. Press the Assist-X or Assist-Y to set the minutes,
then press the Assist-A enables the set value.
The “Setting menu" screen is displayed.
You can change the numbers quickly by holding down the
Assist-X or Assist-Y.
5. Press the Assist-X or Assist-Y to move the cursor to "Exit".
6.
Pressing the Assist-A exits the setting menu and takes you back to the basic screen.
Assist Shift Assist Shift
Assist Shift Assist Shift
<SW-E6000>
<SW-E6000>
Assist Shift Assist Shift
<SW-E6010>
Assist Shift Assist Shift
<SW-E6010>
<SC-E6000><SC-E6010>