https://shimano-steps.com/
148 149
https://shimano-steps.com/
E6000 MANUALE8000 CONCEPT E8000 MANUAL E6000 CONCEPT
If the adjustment value is not [0]
1. Press Shift-X or Shift-Y and revert the adjustment value to [0].
2.
Press Assist-A.
Select "OK", then perform an actual gear shift to check whether the condition has improved.
If there is any noise or unusual feeling, see
"If the adjustment value is [0]" to continue.
Finally, go for an actual ride and check for any noise or unusual feeling.
• Motor unit shifting adjustment can only be performed when it is assembled with DI2 internal geared hub.
• The settings have a range of “-4” to “4”.
<SC-E6010>
<SC-E6000>
− 4
0
Assist Shift
<SW-E6000> <SW-E6010>
Assist Shift
Assist Shift
Assist Shift
<SW-E6000> <SW-E6010>
The condition has worsened
Adjust the adjustment value by 2 speeds
in the opposite direction and check the
gear shifting operation again.
Then, adjust the value by 1 speed in the
same direction and check until any noise
or unusual feeling is gone.
<SC-E6010>
<SC-E6000>
− 1
1
Finally, go for an actual ride and check for any noise or unusual feeling.
To Next Page
Loading...
