42
Installation/removal
Installing the battery mount
1. Temporarily install the lower bracket.
Lower bracket mounting
screw
(Temporary)
Lower bracket
2. Temporarily install the upper bracket with the installation position
determined.
BM-E8030
Install the TL-BME04-S to the upper bracket, and temporarily install the upper bracket so
that the dummy key cylinder can be seen in the center position from the frame key hole.
Proceed to the next procedure with the TL-BME04-S installed.
(Temporary)
Upper bracket mounting
screw
Head tube side
Frame key hole
TL-BME04-S
To Next Page
Loading...
