25
INSTALLATION/REMOVAL
Installing the brake hose
2. Check the appropriate length of the brake hose.
Secure the brake lever in the position used when riding.
Check the mark on the brake hose with the edge of the brake lever connecting bolt.
* If the hose is at the appropriate length, it is not necessary to cut the hose. Proceed to
“Connecting the hose” in “Installing the brake hose.”
* If the hose needs to be shortened, proceed to “Cutting the hose” in “Installing the
brake hose.”
* If the hose length is insufficient, replace with a hose that has an appropriate length.
Proceed to “Replacing the brake hose”.
Mark
Connecting bolt
Appropriate length
To Next Page
Loading...
