14
INSTALLATION/REMOVAL
Installing the disc brake rotor
Installing the disc brake rotor
1. Check that the spokes are laced as shown in the figure.
Radial lacing cannot be used.
Front left Rear left Rear right Front right
2. Set the disc brake rotor on the hub, and then secure it with the disc
brake rotor lock ring.
Secure with TL-LR15 and an adjustable wrench or TL-FC36.
Disc brake rotor lock ring
Lock ring tightening tool
40 N·m
Internal spline type External spline type
Disc brake rotor lock ring
Lock ring tightening tool TL-LR15 and adjustable wrench TL-FC36
To Next Page
Loading...
