EasyManua.ls Logo

Shimano Steps E6000 Series - Page 15

Shimano Steps E6000 Series
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Charging-in-progress indication
Battery level indicator*1 Battery level
0% - 20%
21% - 40%
41% - 60%
61% - 80%
81% - 99%
100%
*1
: No light : Lights up : Flashing
Battery level indication
The current remaining battery level can be checked by pressing the power button on the battery. The current battery level
will not be displayed if the battery is installed onto the bicycle.
Battery level indicator*1 Battery level
100% - 81%
80% - 61%
60% - 41%
40% - 21%
20% - 1%
0%
Power off / Shutdown
*1
: No light : Lights up : Flashing
Handling and charging the battery
Charging can be carried out at any time regardless of the amount of charge remaining, but you should fully charge the
battery at the following times. Be sure to use the special charger when recharging the battery at these times.
The battery is not fully charged at the time of purchase. Before riding, be sure to charge the battery until it is fully
charged.
If you will not use the bicycle for an extended period of time, charge the battery before storing the bicycle.
If the battery has become fully spent, charge it as soon as possible. If you leave the battery without charging it, it will
cause the battery to deteriorate.
If you will not ride the bicycle for an extended period of time, charge the battery periodically. Do not let the battery
discharge completely.

Related product manuals