Shining 3D Freescan Combo - Preparation for Scanning

Preparation
Make some preparations when scanning different objects.
Marker
Markers shall be attached to models. If the device fails to catch markers, it will not emit
laser lines in the laser scan mode.
● Attach the markers evenly and randomly.
● Four markers are required for the alignment at communal areas.
● Ensure that the device’s camera can scan at least 4 markers within the normal scanning
range.
● Please attach small markers
1
on the edges or at small facets of the model.
● Do not attach the markers on the surface with high curvature.
● Do not use damaged or incomplete markers.
● Do not use greasy, dusty, or dirty markers.
Error1：Artificial
grouping of markers
Error2：Attach markers
only on one line
Markers are attached correctly
Hair
Comb the hair before scanning in the IR mode.
Mesh 后处理 测量 保存
Alignment( for
multiple projects)
Post-process Measurement Save