Shining 3D Freescan Combo - Third-Party Software Integration Details

Geomagic Essentials and Solid Edge SHINING 3D Edition.
Icon Name Description
Export data
to
Geomagic
Control X
Mainly used for 3D test. If the GeomagicControl X
software has been installed, clicking this button will
open the GeomagicControl X software and import the
mesh data.
Export data
to Verisurf
Mainly used for 3D test. If the Design with Verisurf
software has been installed, clicking this button will
open the Design with Verisurf and import the
encapsulated stl data into Design with Verisurf.
Export data
to
Geomagic
Design X
Mainly used for reverse design of mesh data. If the
GeomagicDesign X has been installed, clicking this
button will open the GeomagicDesign X and import the
mesh data.
Export data
to
Geomagic
Essentials
Mainly used for reverse design of mesh data. If the
GeomagicEssentials has been installed, clicking this
button will open the GeomagicEssentials and import the
mesh data.
Export data
to Solid
Edge
SHINING
3D Edition
Mainly used for reverse design of mesh data. If Solid
Edge has been installed, clicking this button will open
the Solid Edge and import the encapsulated stl data into
Solid Edge.
Contact Us
By Email: metrology_support@shining3d.com
Support platform: support.shining3d.com
Shining 3D Offices
APAC Region & Headquarters
SHINING 3D Tech Co., Ltd.
Hangzhou, China
Phone: +86 571 82999050