-2-
Model D4902 (For Machines Mfd. Since 11/18)
INTRODUCTION
INTRODUCTION
Woodstock Technical Support
This machine has been specially designed to provide many years of trouble-free service. Close attention
to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation.
Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to
include the basic information for safety, setup, operation, maintenance, and service of this product.
We stand behind our machines! In the event that questions arise about your machine, please contact
Woodstock International Technical Support at (360) 734-3482 Ext. 2 or send e-mail to: techsupport@
woodstockint.com. Our knowledgeable staff will help you troubleshoot problems and process warranty
claims.
If you need the latest edition of this manual, you can download it from http://www.woodstockint.com/
manuals.
If you have comments about this manual, please contact us at:
Woodstock International, Inc.
Attn: Technical Documentation Manager
P.O. Box 2309
Bellingham, WA 98227
Email: manuals@woodstockint.com
The tenoning jig is designed to work with your table saw
to make a tenon, such as shown at right, which will be
part of a mortise and tenon joint.
With the tenoning jig mounted in the miter slot of the
table saw, the workpiece is clamped upright to the jig in
various configurations so that the tenon cheek cuts can be
made. Then the jig is removed and the workpiece is laid
flat on the table saw to make the shoulder cuts.
Functional Overview
Example of a completed basic tenon.
To Next Page
Loading...
