Desktop Quick-Start Guide • September 13, 2016
© Copyright 2016 ShopBot Tools, Inc. page 21
Zero the X- and Y-Axes
Click the middle white button marked with the X, Y to zero
the X- and Y-axes to the left lower (front) corner of the ma-
chine.
The X and Y locations in the control panel should now read .000 in.
Click OK.
The spindle/router should now be in the left lower (front) corner of the deck. X=0, Y=0 position.
Stand clear of the tool when it is in motion.
A ShopBot is a very safe power tool as long
as safety procedures are followed.
To Next Page
Loading...