SHOWTEC ColorCue 3 - User Manual

ColorCue 3 V1
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Order code: 50705
MANUAL
ENGLISH

Summary

Warning and Safety Information

Safety Instructions

Essential guidelines for qualified personnel involved in installation, operation, and maintenance of the device.

Setup Mode

LEDs Type Setup

Instructions on selecting the appropriate LED type (e.g., RGB, RGBWA/UV) for connected lighting fixtures.

Fixture and Mode Configuration

DMX Starting Address of the Connected Fixtures

Explanation of how the device automatically calculates DMX starting addresses based on LED type setup.

Control Modes

Details the two primary operating modes: Double (12-fixture) and Single (24-fixture) control.

Operating Functions

Manual Operating Mode and Scene Creation

Create a Scene in Bank A (Double Control Mode)

Step-by-step guide to creating a scene in Bank A using the double (12-fixture) control mode.

Advanced Scene Management

Create a Scene in Bank B (Double Control Mode)

Step-by-step guide to creating a scene in Bank B using the double (12-fixture) control mode.

Create a Scene (Single Control Mode)

Step-by-step guide to creating a scene using the single (24-fixture) control mode.

Programming Mode

Record a Scene

Procedure for recording a created scene and assigning it to a playback button.

Record a Chase

Process for recording a sequence of steps to create a chase and assigning it to a playback button.

Chase Step Insertion and Playback

Playback Mode

Factory Reset

Maintenance and Troubleshooting

Troubleshooting

A guide to identify and resolve common operational problems, starting with basic checks.

No Light

No Response to DMX

SHOWTEC ColorCue 3 Specifications