Need help?Do you have a question about the SHOWTEC Compact Par 7 Tri and is the answer not in the manual?
General| LED Quantity | 7 |
|---|---|
| LED Power | 3W |
| LED Color | RGB |
| Beam Angle | 25° |
| Power Consumption | 30W |
| Housing Material | Aluminum |
| Protection Class | IP20 |
| Type | LED Par |
| Control | DMX, Auto, Master/Slave |
| DMX Channels | 4/7 |
| Power Supply | 100-240V AC, 50/60Hz |
| Voltage | 100-240V |
Read manual before installation, operation, or servicing.
Specifies the device's purpose as a professional indoor light effect.
Advice on reducing wear and improving device longevity.
Explains formatting and symbols used in the manual.
Defines safety signs and signal words used in the manual.
Explains symbols found on the device's information label.
Critical safety notices regarding voltage, children, and short-circuits.
Further safety instructions for operation and handling.
Defines roles of ordinary, instructed, and skilled persons.
Pre-use checks, IP rating, and user qualifications.
Illustrates and labels device parts and connections.
Detailed electrical, optical, and physical specifications.
Provides the physical measurements of the device.
Crucial safety warnings for correct installation.
Specifies required PPE during installation.
Environmental and location criteria for installation.
Instructions for securing the device to structures.
How to adjust the device's tilt angle.
Step-by-step guide for safe power connection.
Important safety advice before starting setup.
Using the device without external control.
Introduction to DMX control and device limitations.
Details on DMX cables, connectors, and pin assignments.
Connecting multiple devices for synchronized operation.
Connecting devices in a chain and setting DMX addresses.
Safety guidelines to follow during device use.
Overview of Stand-alone, Master/Slave, and DMX control.
Explanation of the control panel buttons and display.
Describes the display and modes upon powering on.
Visual diagram of the device's menu hierarchy.
Details on selecting main menu options like programs, auto, DMX.
How to select and activate built-in programs and chases.
Adjusting color presets, intensity, and strobe effects.
Adjusting speed, strobe, and fade for built-in chases.
Activating auto mode and fine-tuning its parameters.
Setting DMX starting address and channel modes.
Configuring slave operation and sound-controlled mode.
Detailed breakdown of DMX channels and their functions.
Specific notes on DMX channel interactions and modes.
Solutions for issues like no DMX control or no light.
Safety measures before performing maintenance.
Routine inspections for device integrity.
Steps for cleaning the device's exterior and lens.
Procedure for replacing a blown fuse safely.
Safe removal and movement procedures.
Proper storage and environmentally sound disposal methods.
Information on product compliance and declarations.
To Next Page
