01) Press the SETUP button to enable the built-in program selection.
02) Press the UP/DOWN buttons to select one of the 7 color presets or OFF. The device will output the
selected color.
03) Press the SETUP button to enable the manual color adjustment.
04) Press the UP/DOWN buttons to adjust the color intensity. The adjustment range is 000–255, from low to
high intensity.
05) Press the SETUP button to enable the strobe frequency adjustment.
06) Press the UP/DOWN buttons to adjust the frequency of the strobe effect. The adjustment range is 00–
99, from low to high frequency.
Built-in Programs
If you have selected one of the Programs 02–10, you can additionally adjust the speed and add strobe
effect.
01) Press the SETUP button to enable the speed adjustment.
02) Press the UP/DOWN buttons to adjust the speed of the built-in chase. The selection range is 01–99 and
SP.FL, from low to high speed.
03) Press the SETUP button to enable the strobe frequency adjustment.
04) Press the UP/DOWN buttons to adjust the frequency of the strobe effect. The adjustment range is 00–
99, from low to high frequency.
Auto Mode
In this menu you can activate the auto operation mode. You can additionally adjust the speed, add a
strobe effect or adjust the fade time.
01) Press the SETUP button to enable the speed adjustment.
02) Press the UP/DOWN buttons to adjust the speed of the built-in chase. The selection range is 01–99 and
SP.FL, from low to high speed.
03) Press the SETUP button to enable the strobe frequency adjustment.
04) Press the UP/DOWN buttons to adjust the frequency of the strobe effect. The adjustment range is 00–
99, from low to high frequency.
05) Press the SETUP button to enable the fade time adjustment.
06) Press the UP/DOWN buttons to adjust the time of the fade effect. The adjustment range is 00–99, from
short to long fade time.
To Next Page
Loading...
