Need help?Do you have a question about the SHOWTEC Phantom 130 Spot and is the answer not in the manual?
General| Type | Moving Head Spot |
|---|---|
| Focus | Manual |
| Pan Range | 540° |
| Tilt Range | 270° |
| Color Wheel | 7 Colors + White |
| Dimmer | 0 - 100% |
| Strobe | 0 - 20 Hz |
| Control Protocol | DMX512 |
| Power Supply | 100-240V AC, 50/60Hz |
| Light Source | LED |
| Gobo Wheel | 7 gobos + open |
| Effects | Prism, Frost |
| Control Modes | DMX, Auto, Sound |
Proper procedure for unpacking the fixture, checking contents, and handling potential shipping damage.
How heat affects LED brightness and lifespan, and tips for managing operational temperatures.
Rules for qualified personnel, manual adherence, and avoiding hazards like moisture and voltage.
Lists the primary technical specifications and capabilities of the moving head fixture.
Identifies the main parts visible on the front of the fixture, including the LED and control panel.
Identifies the connectors and fuse located on the rear panel of the fixture.
Instructions for setting up the fixture and preparing for operation, ensuring correct voltage matching.
Guidance for operating one fixture in Auto, Manual, or Sound-controlled modes.
Instructions for linking multiple fixtures in Master/Slave mode, including cabling and setup.
Step-by-step guide to assigning DMX addresses for correct fixture control, ensuring unique channel assignments.
How the fixture detects DMX signals and troubleshooting tips for connection issues or signal loss.
Detailed instructions for setting the fixture's DMX address using the control panel interface.
How to choose between 12-channel and 16-channel DMX modes for operation.
Steps to configure the fixture as a slave device in a Master/Slave setup.
How to activate the Auto mode for automatic shows and Sound-controlled mode using the built-in microphone.
How to access and view the fixture's system details, including version, mode, address, and temperature.
Step-by-step guide for safely removing and replacing a blown fuse.
Instructions for replacing gobos in the rotating gobo wheel, including size specifications.
Guidance on correctly orienting glass gobos for optimal visual effects when used with rotating gobos.
Steps to diagnose and fix issues where the fixture fails to light up, checking power, LED, and fuse.
Troubleshooting steps for DMX communication problems, including cable checks, settings, and controller issues.
To Next Page