SHOWTEC compact par 7 MKII User Manual

14
Ordercode: 42595
Compact Par 7 MKII
Main Menu Options
DMX address
Master-Slave
Auto run
Built-in Programs
Manual Color
Sound
1.DMX Addressing
With this menu you can set the DMX address.
01) Press the MODE button and then the Up / Down buttons, until the display shows .
02) Press the SETUP button to open this menu. You can choose 512 different DMX addresses.
03) Use the Up / Down buttons to select the required address from .
Once you have set the desired DMX address, you can also choose the desired DMX Mode.
04) Press the SETUP button to set 3 different DMX Modes. Use the Up / Down buttons to choose between
3, 6 or 7 Channels.
2.Slave Mode
With this menu you can set the Master or Slave.
01) Press the MODE button and then the Up / Down buttons, until the display shows .
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement.
If the device has been set to slave, it will react the same as its master device.
3.Auto Run Mode
With this menu you can set Auto Run mode of the Compact Par 7 MKII.
01) Press the MODE button and then the Up / Down buttons, until the display shows .

SHOWTEC compact par 7 MKII Specifications

General

Brand	SHOWTEC
Model	compact par 7 MKII
Category	Flood Light
Language	English