Description of the device
Features
The D-Pack 6 Classic is a light controller from Showtec and features:
• LED indicator and dimmer-fader for each channel
• Preheat 0-50% adjustable
• 3 phase input and 20A per phase
• AC 230V, 50/ 60 Hz
• Power output: 10A per channel max. Total 60A max.
• Fuse: 10A circuit breaker
• Dimensions: 482 x 430 x 89mm
• Weight: 7.1 kg
Note:
Knowledge of DMX is required to fully utilize this unit.
Overview
Front
Fig. 1
1) Channel 1 indicator
This indicator lights if there is no load connected
2) Channel 3 indicator
This indicator lights if there is no load connected
3) Channel 1 circuit breaker
This circuit breaker will cut off the power supply if the load current exceeds 10A
4) Channel 3 circuit breaker
This circuit breaker will cut off the power supply if the load current exceeds 10A
5) Channel 2 indicator
This indicator lights if there is no load connected
6) Channel 4 indicator
This indicator lights if there is no load connected
7) Channel 2 circuit breaker
This circuit breaker will cut off the power supply if the load current exceeds 10A
8) Channel 4 circuit breaker
This circuit breaker will cut off the power supply if the load current exceeds 10A
9) Preheat control
This control is used to adjust the initial lightning point
10) Power LED
11) Channel 1-6 dimmer indicator
12) DMX indicator
13) Channel 5 indicator
This indicator lights if there is no load connected
To Next Page
Loading...
