SHOWTEC Kanjo Spot 10 V1 User Manual

16
Ordercode: 45010
Kanjo Spot 10
9. Manual Mode
01) While in the main menu, press the UP and DOWN buttons until the display shows .
02) Press the ENTER button to enter the menu.
03) Press the UP and DOWN buttons to choose between the two options:
Manual Mode ON
Manual Mode OFF
04) If the display shows , press the ENTER button.
05) Now it is possible to manually adjust the DMX channels (Manual DMX Adjustment Mode, see below).
06) The channel numbers correspond with their DMX functions (see chapter DMX Channels, page 17).
10. Manual DMX Adjustment Mode
Manual Mode (see above) must be set to ON for this mode to work.
For more information about the functions of each channel, get acquainted with chapter
DMX Channels, page 17.
01) While in the main menu, press the UP and DOWN buttons to find one of the 10 available DMX
channels: .
02) Press the ENTER button to enter edition mode.
03) Press the UP and DOWN buttons to adjust the DMX channel values.
04) The adjustment range of each channel is between .
05) Press the ENTER button to save changes.

SHOWTEC Kanjo Spot 10 V1 Specifications

General

Brand	SHOWTEC
Model	Kanjo Spot 10 V1
Category	Light Fixture
Language	English