01) DMX LED indicator
This indicator lights up when there is DMX signal present on DMX ports A and B.
02) Link LED indicator
This indicator lights up when a network signal is received.
03) OLED display + control buttons
04) Power LED indicator
This indicator lights up when the device is powered.
05) Activity LED indicator
This indicator lights up when there is network activity.
06) DMX port B, 3-pin DMX XLR
07) DMX port B, LED indicator
This indicator lights up when there is DMX activity.
08) DMX port A, 3-pin DMX XLR
09) DMX port A, LED indicator
This indicator lights up when there is DMX activity.
10) 12–36 V DC 2-pin Phoenix terminal power connector IN (use only when PoE is not available)
11) Ethernet RJ45 connector
To Next Page
Loading...
