Why does my Shure Microphone system have no sound or faint sound?
If your Shure Microphone system has no sound or faint sound, check the following: If the receiver ready LED is on, verify all sound system connections or adjust gain as needed. If the receiver ready LED is off, turn on the transmitter. Also, ensure the batteries are installed correctly and are fresh. Finally, perform transmitter setup.
What to do if my Shure BLX4 Microphone system has audio artifacts or dropouts?
If you are experiencing audio artifacts or dropouts with your Shure Microphone system, try the following: If the ready LED is flickering or off, change the receiver and transmitter to a different group and/or channel. Identify and remove any nearby sources of RF interference. Replace the transmitter batteries. Ensure the receiver and transmitter are within system parameters. Set up the system within the recommended range and keep the receiver away from metallic surfaces. Ensure the transmitter is in the line of sight from the receiver.
What to do if the receiver LED screen is off on my Shure BLX4 Microphone system?
If the receiver LED screen is off on your Shure Microphone system, make sure the DC adapter is securely plugged into the electrical outlet and that the receiver is powered on.
How to troubleshoot Shure BLX4 with no sound or faint sound?
If your Shure Microphone system has no sound or faint sound, check these potential solutions: 1. Verify all sound system connections and adjust the gain as needed. 2. Ensure the receiver is properly connected to the mixer or amplifier. 3. Turn on the transmitter and make sure the batteries are installed correctly. 4. Perform the transmitter setup. 5. Insert fresh batteries into the transmitter. 6. Ensure the DC adapter is securely plugged into the electrical outlet and that the receiver is powered on.
Why is the transmitter indicator LED flashing red on my Shure BLX4?
General| Ethernet LAN | No |
|---|---|
| Mounting type | - |
| Product color | Black |
| Built-in display | Yes |
| Housing material | ABS |
| Operating frequency | 662 - 686 MHz |
| Operating frequency type | Ultra High Frequency (UHF) |
| Operating temperature (T-T) | -18 - 57 °C |
| Microphone frequency response | 50 - 15000 Hz |
| Total Harmonic Distortion (THD) | 0.5 % |
| Input voltage | 12 - 15 V |
| Power supply type | AC |
| Current consumption | 235 mA |
| XLR out | 1 |
Weight and Dimensions| Depth | 103 mm |
|---|---|
| Width | 188 mm |
| Height | 40 mm |
| Weight | 241 g |
To Next Page
