EasyManua.ls Logo

Shure BLX288/B58 - User Manual

Shure BLX288/B58
23 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BLX
Wireless System
Online user guide for Shure BLX wireless system.
Version: 5.0 (2021-G)

Table of Contents

Questions and Answers

  • A
    andrea65Jul 30, 2025
    How to fix no sound from Shure Microphone system?
    • C
      claytonjonesJul 30, 2025
      If you're experiencing no sound or faint sound with your Shure Microphone system, start by verifying all sound system connections and adjusting the gain as needed. Ensure the receiver is properly connected to the mixer or amplifier. Also, turn on the transmitter, ensure the batteries are correctly installed, and perform the transmitter setup. If that doesn't work, try inserting fresh batteries. Finally, check that the DC adapter is securely plugged into the electrical outlet and that the receiver is powered on.
  • M
    Mark SmithAug 6, 2025
    Why is the transmitter indicator LED flashing red on my Shure Microphone system?
    • D
      dustingarciaAug 6, 2025
      If the transmitter indicator LED is flashing red on your Shure Microphone system, the most likely cause is low batteries. Replace the transmitter batteries to resolve this issue.
  • C
    Christopher RichardsAug 13, 2025
    What to do if my Shure Microphone system has audio dropouts?
    • E
      Erin Hammond MDAug 13, 2025
      To address audio artifacts or dropouts in your Shure Microphone system, begin by replacing the transmitter batteries. Then, identify and eliminate any nearby sources of RF interference. Ensure that the receiver and transmitter are positioned within the specified system parameters, maintaining line of sight and keeping the receiver away from metallic surfaces. The system should be set up within the recommended range for optimal performance.
  • M
    Mary YoungAug 21, 2025
    Why does my Shure BLX288/B58 Microphone system have sound level variations?
    • H
      herbertbrownAug 21, 2025
      If you experience sound level variations when switching to different sources on your Shure Microphone system, adjust the transmitter gain as necessary to achieve a consistent audio level.

Summary

Quick Start Guide

Connect Receiver to Power and Audio

Steps for connecting the receiver to power and an audio output device.

Perform Group Scan

Guide on performing a group scan on the receiver to find the clearest channels.

Features

Front Panel

Description of the front panel controls and indicators on the receiver.

Back Panel

Description of the back panel connectors on the receiver.

Setting Transmitter Group and Channel

Group (letter)

Procedure for manually setting the transmitter group using letter designation.

Channel (number)

Procedure for manually setting the transmitter channel using number designation.

Manually Setting Receiver Group and Channel

Group (letter)

Steps to manually set the receiver group using letter designation.

Channel (number)

Steps to manually set the receiver channel using number designation.

Locking and Unlocking Controls

Transmitter (lock;unlock)

Instructions on how to lock and unlock the transmitter controls.

Receiver (lock;unlock)

Instructions on how to lock and unlock the receiver controls.

Getting Good Sound

Correct Microphone Placement

Guidance on optimal microphone placement for better sound quality.

Wearing the Headworn Microphone

Instructions on how to properly wear a headworn microphone.

Adjusting Gain

BLX1 Gain Adjustment

How to adjust the audio gain for the BLX1 transmitter.

BLX2 Gain Adjustment

How to adjust the audio gain for the BLX2 transmitter.

Important Product Information

Licensing Information

Details on licensing requirements for operating the equipment.

Information to the User

FCC and regulatory information for the user.

Shure BLX288/B58 Specifications

General IconGeneral
TypeStage/performance microphone
Microphone holderYes
Device interface-
Operating frequency662 - 686 MHz
Connectivity technologyWireless
Battery typeAA
Power sourceBattery
Battery voltage1.5 V
Battery technologyAlkaline
Number of batteries supported2
Number of products included1 pc(s)
Output gain-10 dB
Product colorBlack

Related product manuals