Batteries and Charging
GLX-D transmitters are powered by Shure SB902 lithium-ion rechargeable
batteries. Advanced battery chemistry maximizes runtimes with zero memory
effects, eliminating the need to discharge batteries prior to charging.
When not in use, recommended battery storage temperature is 10°C (50°F)
to 25°C (77°F).
Note: The transmitter will not pass RF or audio signals when connected to
the charging cable.
The following battery charging options are available:
Receiver Charging Bay
The receiver's built-in charging bay will charge transmitter batteries when
receiver is plugged in to power outlet.
1. Insert the battery into the charging bay.
2. Monitor the battery charging indicator on the front panel.
Charging from an AC Power Source
1. Plug the charging cable into the charging port on the transmitter.
2. Plug the charging cable into an AC power source.
Charging from a USB Port
1. Plug the USB charging cable into the charging port on the transmitter.
2. Plug the cable into a standard USB port.
LED Status During Charging
The following LED states indicate battery status when the transmitter is
connected to a charger:
• Green = charging complete
• Green Flashing = battery charge > 90%
• Red = battery charging
• Amber Flashing = battery error, replace battery
Installing Transmitter Batteries
Shure IncorporatedGLXD4R Half-Rack Wireless Receiver
2017/05/188/20
To Next Page
Loading...
Need help?
General
Weight and Dimensions
