Shure PSM900 - Bodypack Receiver

Shure Incorporated
14/31
Returns all settings to the factory defaults
NO
Exit and do not reset system.
YES
Reset system settings.
Bodypack Receiver
① Power Switch and Volume Control
Turns the bodypack on and off and adjusts earphone volume.
② 3.5 mm Earphone Jack
Insert earphones here.
③ Scan Button
Pressthescanbuttontofindanavailablefrequency.Pressandholdfortwosecondstofindthegroupwiththemostavail
able channels.
④ IR Window
For transmitting settings between bodypack and rack unit.
⑤ Battery Compartment
Requires 2 AA batteries or Shure rechargeable battery. Open by pressing the latches on both sides and pulling.
⑥ Menu buttons
Useinconjunctionwiththe▼▲buttonstoaccesstheconfigurationmenus.
⑦ ▼▲ Buttons