also to connect the appliance to a power supply with USB connector or to a
car power supply unit
with USB connector to charge the appliance
battery.
5.2.6. Handle
The handle ensures convenient
assembly and disassembly of the level
gauge on a well; and the handle is of a
great length and strength that makes it
possible to tighten (with an adequate
moment) (see Section 4.4.2) the level
gauge on a measuring nipple with the
help of install clips on a rubber
jointing coupling of the level gauge without the use of any other tools.
5.2.7. Additional accessories
GAI-01 Acoustic Pulse
Generator
GAI-01 acoustic impulse
generator is supplied separately and is
designed for generating an acoustic
impulse when there is no excessive gas
pressure in the annular space of the
well. GAI-01 can be used at low annular
pressure for controlling fluid level up to 1800… 2500 m.
GAI-01 is a unit which combines a container for accumulating
excessive air pressure, a manual pump, a shipping lock pin and a valve for
quick bleeding off. The handle has spare rubber gaskets for GAI-01.
GAI-01 is to be installed on the well sounder instead of the
removable manual valve using the reduction sleeve in the gage package.
Multiple-function Valve
The Multiple-function valve is designed for use in level gauges of
the SUDOS series, for generating an acoustic pulse by launching gas into a
well or releasing gas from a well. The valve is installed in place of the
conventional manual valve. If there is a significant excess annular pressure,
the valve is used as a conventional manual valve to generate an acoustic
To Next Page
Loading...