5.3.8 Safety and environmental instructions
5.3.8.1 When operating the device, it is mandatory to comply with
the requirements of the following regulatory documents: GOST 12.1.019,
GOST 12.2.003, GOST 12.2.007.0, GOST IEC 60079-14-2013, GOST
31610.0 (IEC 60079-0:2011), GOST 31610.11 ( IEC 60079-11:2011),
Technical Regulations of the Customs Union CU TR 012/2011 "On the
safety of equipment for operation in explosive environments".
5.3.8.2 Do not operate the tool in any of the following cases: - The
outer shell of the device is damaged; - The lid of the appliance is damaged.
- The appliance lid is not closed
5.3.8.3 It is allowed to mount and dismount the device at the object
of study only if the shut-off valves are in full working order. When
installing and dismantling the device, the shut-off valves must be carefully
closed.
5.3.8.4 It is forbidden to use the level gauge if the device exceeds
the parameters of limit states. The limit states of the device include:
− Achievement of assigned indicators;
- Violation of the geometric shape and dimensions of parts,
preventing normal functioning;
− Irreversible destruction of parts caused by corrosion, erosion and
aging of materials.
5.3.8.5 The device does not use life-threatening voltage. During
operation, the device does not emit harmful substances and does not have
harmful effects on the environment.
6. PREPARING FOR WELL TEST
ATTENTION! When preparing tests, assembling and
disassembling equipment, please strictly follow the requirements of the
Safe Operating Instruction (Section 4).
Warning:
In case of touching the body of the device with your hands, it
may turn on abnormally due to static electricity. This is not a
malfunction and does not affect the performance of the device. The
device will turn off automatically after 100 seconds. It is recommended
To Next Page
Loading...