5 - GENERAL INFORMATION
Please find herewith below some instructions to be followed during the controller usage and
maintenance in order to ensure its long-term operativity.
5.1 – Packaging and storage
The package consists in a box with a product identification label.
The device must be stored in environments compliant with the following characteristics:
- temperature within +4°C e +40°C;
- relative humidity within 30 % and 95 %.
5.2 – Installation
The controller installation must be performed by qualified technical staff; the installation
procedures must be performed when the device is off power.
The device consists in an ABS case closed on front by a cover blocked with 4 screws. As an
optional, a transparent cover is available that can be used as a keyboard protection.
The controller is supplied by a 230 / 12 Vac transformer. Upon request, other types of transformer
are available (Es. 115 / 12 Vac – 60 Hz).
The right hand side of the case is opened where the DIN sockets are placed (Fig. 9).
To Next Page
Loading...
Need help?
General
