SICE S 65 E - Transport, Storage and Handling

Operator's Manual S 65 E - S 65 E C 75
TRANSPORT, STORAGE AND HANDLING
Handling prior to installation
The basic wheel balancer packaging consists of 1 wooden crate containing:
- the wheel balancer (Fig.8)
- equipment;
- the wheel guard and corresponding mounting tube (C, fig.5a - D, fig. 5a).
Before installation, the wheel balancer must be shipped in its original packaging, making
sure that the machine is maintained in the position indicated on the outer packaging.
The machine can be moved by placing the packaging on a wheeled trolley or inserting
the forks of a fork lift truck in the relative slots in the pallet (Fig. 1).
1
- Packaging dimensions:
Length Depth Height Weight Packaging weight
(mm) (mm) (mm) (kg) (kg)
1410 890 1260 158 (version NO C) 80
162 (version C)
- The machine must be stored in an environment meeting the following requirements:
• relativehumidityrangingfrom20%to95%;
• temperaturerangingfrom-10°to+60°C.
WARNING
Do not stack more than two packs to avoid damaging them.