SICE S 65 E - Main Features

84 Operator's Manual S 65 E - S 65 E C
Key to caution and instruction labels
Do not use the wheel spin shaft as a gripping point for lifting the
machine.
Unplugthepowersupplyplugbeforeperforminganymaintenance/
repair operations on the machine.
Do not lift up the guard when the wheel is turning.
Please use centring accessories with hole diameter 40 mm.
MAIN FEATURES
- Low balancing speed:
• minimiseswheelspintimes;
• reducesriskduetorotatingparts;
• savesenergy.
- Automatic sensor for distance and diameter measurement.
- LaserX pointer ie laser line inside the automatic detection arm to indicate the position
of the balancing plane acquisition (available on request).
- AWD (Auto Width Device) programme for measuring the width using an ultrasonic sensor
(if fitted).
- “AWC” (Auto Width Calculation) programme for enabling the manual insertion of the
width.
- Automatic brake for stopping the wheel at the end of the spin.
- STOP button to stop the machine immediately.
- Side flange holders.
- Top tray to take weights of all types.
- High-resolution LCD monitor, indispensable aid for executing new programmes.
- User-friendly graphics for fast and effective learning of the machine functions.