SICK 1036616 SOPAS - Page 18

PROGRAMMING TOOL | SICK 8016223/19SR/2020-11-02
Subject to change without notice
18
PGT PGT-08-S@SOPA S
Youcandenethefollowingparametersduringprogramming:
Parameter AFS60B-xxPxxxxxxx AFS60A-xxPxxxxxxx AFM60B-xxRxxxxxxx AFM60A-xxRxxxxxxx AFM60B-xxSxxxxxxx AFM60A-xxSxxxxxxx AFM60B-xxPxxxxxxx AFM60A-xxPxxxxxxx AHS36A-xxPxxxxxxx AHM36A-xxPxxxxxxx Description
Operation
mode
– – – Binary
Non-binary
Binary
Non-binary
Round Axis
Denestheoperatingmode
and the relevant available
scaling parameters.
Steps per revo-
lution
B: 1 to
32768
A: 1 to
262144
B: 1 to
32768
A: 1 to
262144
B: 1 to
32768
A: 1 to
262144
1 to 16384 1 to 16384 Denesthenumberofsteps
per revolution.
Number of
revolutions
– 4096xed,
not program-
mable
4096xed,
not program-
mable
– 1 to 4096 Denesthenumberofrevo-
lutions.
Parameters
Round Axis
function
– – – – X Number of revolutions Nu-
merator:
Denesthenumeratorforthe
number of revolutions.
Number of revolutions De-
nominator:
Denesthedenominatorfor
the number of revolutions.
Total measuring range:
Denesthetotalnumberof
steps possible across the
number of revolutions.
Move SSI posi-
tion bits
– – – X X The arrow buttons can be
used to move the SSI position
bits.
Thisallowsdierent
SSI formats to be implement-
ed, such as right-aligned,
left-aligned, or tree array.
A description of the color
values for the individual bits
can be found in the SOPAS
context help.
Counting direc-
tion (CW/CCW/
External)
X X X X X Denesthedirectionofrota-
tion according to the shaft.
CW = clockwise.
CCW = counter-clockwise.
External = setting via pin/
wire.
SSI-Code Type – – – Gray
Binary
Gray
Binary
DenestheSSIcodetype
for outputting the absolute
position.