SICK AFS60 PROFINET User Manual

O P E R A T I N G I N S T R U C T I O N S
AFS60 PROFINET
AFM60 PROFINET
Absolute Encoder

SICK AFS60 PROFINET Specifications

General

Brand	SICK
Model	AFS60 PROFINET
Category	Media Converter
Language	English

Summary

On safety

Authorized personnel

Specifies requirements for personnel authorized to install, commission, and service the encoder.

Correct use

Defines the intended and proper usage of the absolute encoder.

General safety notes and protective measures

Outlines general safety guidelines and protective measures for using the encoder.

Commissioning

Electrical installation

Provides instructions for the electrical installation of the encoder.

Settings on the hardware

Integration into the PLC

Guides on integrating the encoder into a PLC using Siemens TIA Portal.

Configuration of the encoder via the Parameter Access Point

Describes how to configure the encoder using the Parameter Access Point in TIA Portal.

Reading the position

Setting preset value

Configuring encoder as technology object

Details configuring the encoder as a technology object in TIA Portal.

Troubleshooting

In the event of faults or errors

Provides immediate actions to take when faults or errors occur.

Diagnostics

Error and status indications on the LEDs

Error transmission via PROFINET

Describes diagnostic features for error localization via PROFINET.

Error message on vendor specific parameters

Details how to read error messages from vendor-specific parameters.

Current errors

Current warnings

Alarm channel

Replacement of an encoder in the PROFINET network