SICK ATM60 SSI User Manual

ATM60 SSI
Montageanleitung
Installation instructions
D
GB
For use in NFPA 79 applications only.
Interconnection cables and accessories
are available from Sick.
CUS
U
L
®
0900_sick_MA_8013417.indd 10900_sick_MA_8013417.indd 1 13.05.11 09:5513.05.11 09:55

SICK ATM60 SSI Specifications

General

Brand	SICK
Model	ATM60 SSI
Category	Media Converter
Language	English

Summary

Servo Flange Installation

Installation via Threaded Holes

Mounting the encoder using threaded holes on the flange side.

Installation with Servo Clamps

Mounting the encoder using servo clamps.

Face Mount Flange Installation

Installation via Threaded Holes

Mounting the encoder using threaded holes on the flange side.

Installation via Mounting Spigot

Mounting the encoder using the mounting spigot.

Blind Hollow Shaft Installation

Installation with Stator Coupling

Mounting the encoder with stator coupling for a blind hollow shaft.

Zero-Point Adjustment and Operation

Zero-Point Adjustment Methods

Details two methods for setting the encoder's zero point: button or SET line.

Counting Direction

Explanation of how the forward/backward input determines counting direction.

Maintenance Advice

Recommendations for regular checks of the encoder.

PIN and Wire Allocation

Connector M23 Pinout

Details the PIN number, signal, wire colors, and explanation for the M23 connector.