Need help?Do you have a question about the SICK SK 20.2 and is the answer not in the manual?
General| Brand | SICK |
|---|---|
| Model | SK 20.2 |
| Category | Media Converter |
| Language | English |
Guidance on navigating the technical manual for proper product operation.
Specifies the signal converter's application in the industrial sector and necessary risk assessment.
Explains the meaning of danger, notice, and note symbols used throughout the manual.
Outlines essential safety precautions for connection, commissioning, and operation to prevent injury.
Describes the basic function of converting SSI signals to analog output for connecting encoders to control systems.
Illustrates typical standalone and parallel connection scenarios for the signal converter.
Details the digital transistor output and selectable analog output (0-10 V, 0-20 mA, 4-20 mA).
Provides guidelines for installing the unit in a metal housing, including wiring and grounding.
Describes the normal operating state indicated by LEDs and identifies front panel components.
Shows the physical layout of terminals and their corresponding labels on the device.
Illustrates the electrical connections for SSI encoders, power supply, and analog output.
Explains how to configure the device using DIP-switches for analog output and SSI encoder settings.
Details the requirements and steps to activate the teach-in programming mode for the signal converter.
Guides on setting and storing the minimum position for analog output conversion.
Guides on setting and storing the maximum position for analog output conversion.
Describes the procedure to terminate the teach-in mode and return to normal operation.
Explains how to verify the correct operation and identify potential encoder overflow issues.
Lists error codes (E1-E4) indicated by LEDs and their corresponding causes.
Provides a step-by-step procedure for replacing a defective signal converter.
Specifies requirements for shockproof shipping and using original packaging.
Outlines conditions for storing the product, including temperature, humidity, and protection from dust.
Informs about proper disposal or recycling of the product according to environmental regulations.
To Next Page
