2. Characteristics
2.1 Fundamentals
The signal converter SK 20 converts data from digital position information
into analogue signal (voltage or current). By using this SK20 signal
converter, digital standard encoders can be connected with analogue
control systems.
In case of parallel connection to an existing system it is possible to record
the position-time-movement for example by using a plotter with analogue
signal input.
2.2 Application examples
Figure 1: Application exampes
8026616/2021-03-11 • Subject to change without notice • SICK AG • Waldkirch • Germany • www.sick.com
To Next Page
Loading...
